页次: 1
U-Boot 2024.04-rc5-dirty (Sep 14 2025 - 21:10:55 +0800) Allwinner Technology
CPU: Allwinner F Series (SUNIV)
Model: F1C200s LCOS
DRAM: 64 MiB
Core: 29 devices, 17 uclasses, devicetree: separate
WDT: Not starting watchdog@1c20ca0
MMC: mmc@1c0f000: 0
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
In: serial@1c25000
Out: serial@1c25000
Err: serial@1c25000
Net: No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
395 bytes read in 3 ms (127.9 KiB/s)
5216296 bytes read in 220 ms (22.6 MiB/s)
6611 bytes read in 3 ms (2.1 MiB/s)
Kernel image @ 0x81000000 [ 0x000000 - 0x4f9828 ]
Booting using the fdt blob at 0x81800000
Working FDT set to 81800000
Loading Device Tree to 82dfb000, end 82dff9d2 ... OK
Working FDT set to 82dfb000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 6.10.0-dirty (qsy@qsy-virtual-machine) (arm-none-eabi-gcc (GNU Arm Embedded Toolchain 10.3-2021.10) 10.3.1 20210824 (release), GNU ld (GNU Arm Embedded Toolchain 10.3-2021.10) 2.36.1.20210621) #6 Wed Sep 17 09:27:54 CST 2025
[ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] OF: fdt: Machine model: F1C200s LCOS
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x83000000 on node -1
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000080000000-0x0000000083ffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x0000000083ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000083ffffff]
[ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
[ 0.000000] Unknown kernel command line parameters "earlyprintk", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16384
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 37332K/65536K available (7484K kernel code, 713K rwdata, 2216K rodata, 260K init, 248K bss, 11820K reserved, 16384K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000010] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000133] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000866] Console: colour dummy device 80x30
[ 0.001008] Calibrating delay loop... 203.16 BogoMIPS (lpj=1015808)
[ 0.070273] CPU: Testing write buffer coherency: ok
[ 0.070517] pid_max: default: 32768 minimum: 301
[ 0.071081] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.071158] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.077838] Setting up static identity map for 0x80008400 - 0x80008458
[ 0.080333] devtmpfs: initialized
[ 0.085431] VFP support v0.3: not present
[ 0.086083] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.086170] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.090096] pinctrl core: initialized pinctrl subsystem
[ 0.095174] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.098151] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.100705] thermal_sys: Registered thermal governor 'step_wise'
[ 0.117587] SCSI subsystem initialized
[ 0.120627] usbcore: registered new interface driver usbfs
[ 0.120772] usbcore: registered new interface driver hub
[ 0.120968] usbcore: registered new device driver usb
[ 0.121520] mc: Linux media interface: v0.10
[ 0.121710] videodev: Linux video capture interface: v2.00
[ 0.122005] pps_core: LinuxPPS API ver. 1 registered
[ 0.122035] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.122101] PTP clock support registered
[ 0.123918] Advanced Linux Sound Architecture Driver Initialized.
[ 0.127320] clocksource: Switched to clocksource timer
[ 0.175031] NET: Registered PF_INET protocol family
[ 0.175698] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.177691] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.177807] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.177860] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.177922] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.177992] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.178268] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.178351] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.178919] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.180905] RPC: Registered named UNIX socket transport module.
[ 0.180957] RPC: Registered udp transport module.
[ 0.180975] RPC: Registered tcp transport module.
[ 0.180988] RPC: Registered tcp-with-tls transport module.
[ 0.181002] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.184590] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[ 0.187148] NFS: Registering the id_resolver key type
[ 0.187416] Key type id_resolver registered
[ 0.187453] Key type id_legacy registered
[ 0.187880] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.187928] io scheduler mq-deadline registered
[ 0.187952] io scheduler kyber registered
[ 0.188084] io scheduler bfq registered
[ 0.485389] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.512803] CAN device driver interface
[ 0.515314] UDC core: g_ether: couldn't find an available UDC
[ 0.515383] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
[ 0.515508] UDC core: g_cdc: couldn't find an available UDC
[ 0.516539] i2c_dev: i2c /dev entries driver
[ 0.521319] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 0.525564] usbcore: registered new interface driver usbhid
[ 0.525607] usbhid: USB HID core driver
[ 0.531139] NET: Registered PF_PACKET protocol family
[ 0.531191] can: controller area network core
[ 0.531371] NET: Registered PF_CAN protocol family
[ 0.531404] can: raw protocol
[ 0.531431] can: broadcast manager protocol
[ 0.531463] can: netlink gateway - max_hops=1
[ 0.531884] Key type dns_resolver registered
[ 0.582312] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.595963] suniv-f1c100s-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 0.597598] suniv-f1c100s-pinctrl 1c20800.pinctrl: supply vcc-pe not found, using dummy regulator
[ 0.600113] printk: legacy console [ttyS0] disabled
[ 0.621688] 1c25000.serial: ttyS0 at MMIO 0x1c25000 (irq = 116, base_baud = 6250000) is a 16550A
[ 0.621863] printk: legacy console [ttyS0] enabled
[ 1.205086] suniv-f1c100s-pinctrl 1c20800.pinctrl: supply vcc-pc not found, using dummy regulator
[ 1.215053] sun6i-spi 1c05000.spi: Failed to request TX DMA channel
[ 1.221516] sun6i-spi 1c05000.spi: Failed to request RX DMA channel
[ 1.232107] usb_phy_generic usb_phy_generic.0.auto: dummy supplies not allowed for exclusive requests (id=vbus)
[ 1.246270] g_ether gadget.0: HOST MAC 76:91:e2:fd:7b:5b
[ 1.251780] g_ether gadget.0: MAC c2:b5:d0:26:14:6▒
U-Boot SPL 2024.04-rc5-dirty (Sep 14 2025 - 21:10:55 +0800)
DRAM: 64 MiB
Trying to boot from MMC1
U-Boot 2024.04-rc5-dirty (Sep 14 2025 - 21:10:55 +0800) Allwinner Technology
CPU: Allwinner F Series (SUNIV)
Model: F1C200s LCOS
DRAM: 64 MiB
Core: 29 devices, 17 uclasses, devicetree: separate
WDT: Not starting watchdog@1c20ca0
MMC: mmc@1c0f000: 0
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
In: serial@1c25000
Out: serial@1c25000
Err: serial@1c25000
Net: No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
395 bytes read in 3 ms (127.9 KiB/s)
5216296 bytes read in 220 ms (22.6 MiB/s)
6611 bytes read in 3 ms (2.1 MiB/s)
Kernel image @ 0x81000000 [ 0x000000 - 0x4f9828 ]
Booting using the fdt blob at 0x81800000
Working FDT set to 81800000
Loading Device Tree to 82dfb000, end 82dff9d2 ... OK
Working FDT set to 82dfb000
Starting kernel ...
U-Boot 2020.07 (Sep 01 2025 - 07:26:28 -0700) Allwinner Technology
CPU: Allwinner F Series (SUNIV)
Model: Allwinner F1C100s Generic Device
DRAM: 64 MiB
MMC: mmc@1c0f000: 0, mmc@1c10000: 1
Loading Environment from FAT... Card did not respond to voltage select!
Loading Environment from SPI Flash... unrecognized JEDEC id bytes: ff, ef, aa
*** Warning - spi_flash_probe_bus_cs() failed, using default environment
Setting up a 480x272 lcd console (overscan 0x0)
In: serial
Out: vga
Err: vga
Allwinner mUSB OTG (Peripheral)
starting USB...
No working controllers found
Hit any key to stop autoboo▒
U-Boot SPL 2020.07 (Sep 01 2025 - 07:26:28 -0700)
DRAM: 64 MiB
Trying to boot from MMC1
U-Boot 2020.07 (Sep 01 2025 - 07:26:28 -0700) Allwinner Technology
CPU: Allwinner F Series (SUNIV)
Model: Allwinner F1C100s Generic Device
DRAM: 64 MiB
MMC: mmc@1c0f000: 0, mmc@1c10000: 1
Loading Environment from FAT... Card did not respond to voltage select!
Loading Environment from SPI Flash... unrecognized JEDEC id bytes: ff, ef, aa
*** Warning - spi_flash_probe_bus_cs() failed, using default environment
Setting up a 480x272 lcd console (overscan 0x0)
In: serial
Out: vga
Err: vga
Allwinner mUSB OTG (Peripheral)
starting USB...
No working controllers found
Hit any key to stop autoboo▒
U-Boot SPL 2020.07 (Sep 01 2025 - 07:26:28 -0700)
DRAM: 64 MiB
Trying to boot from MMC1
U-Boot 2020.07 (Sep 01 2025 - 07:26:28 -0700) Allwinner Technology
CPU: Allwinner F Series (SUNIV)
Model: Allwinner F1C100s Generic Device
DRAM: 64 MiB
MMC: mmc@1c0f000: 0, mmc@1c10000: 1
Loading Environment from FAT... Card did not respond to voltage select!
Loading Environment from SPI Flash... unrecognized JEDEC id bytes: ff, ef, aa
*** Warning - spi_flash_probe_bus_cs() failed, using default environment
Setting up a 480x272 lcd console (overscan 0x0)
In: serial
Out: vga
Err: vga
Allwinner mUSB OTG (Peripheral)
starting USB...
No working controllers found
Hit any key to stop autoboo▒
U-Boot SPL 2020.07 (Sep 01 2025 - 07:26:28 -0700)
DRAM: 64 MiB
Trying to boot from MMC1
U-Boot 2020.07 (Sep 01 2025 - 07:26:28 -0700) Allwinner Technology
CPU: Allwinner F Series (SUNIV)
Model: Allwinner F1C100s Generic Device
DRAM: 64 MiB
MMC: mmc@1c0f000: 0, mmc@1c10000: 1
Loading Environment from FAT... Card did not respond to voltage select!
Loading Environment from SPI Flash... unrecognized JEDEC id bytes: ff, ef, aa
*** Warning - spi_flash_probe_bus_cs() failed, using default environment
Setting up a 480x272 lcd console (overscan 0x0)
In: serial
Out: vga
Err: vga
Allwinner mUSB OTG (Peripheral)
starting USB...
No working controllers found
Hit any key to stop autoboo▒
U-Boot SPL 2020.07 (Sep 01 2025 - 07:26:28 -0700)
DRAM: 64 MiB
Trying to boot from MMC1
U-Boot 2020.07 (Sep 01 2025 - 07:26:28 -0700) Allwinner Technology
CPU: Allwinner F Series (SUNIV)
Model: Allwinner F1C100s Generic Device
DRAM: 64 MiB
MMC: mmc@1c0f000: 0, mmc@1c10000: 1
Loading Environment from FAT... Card did not respond to voltage select!
Loading Environment from SPI Flash... unrecognized JEDEC id bytes: ff, ef, aa
*** Warning - spi_flash_probe_bus_cs() failed, using default environment
Setting up a 480x272 lcd console (overscan 0x0)
In: serial
Out: vga
Err: vga
Allwinner mUSB OTG (Peripheral)
starting USB...
No working controllers found
Hit any key to stop autoboot▒
U-Boot SPL 2020.07 (Sep 01 2025 - 07:26:28 -0700)
DRAM: 64 MiB
Trying to boot from MMC1
页次: 1